Appendix B : Glossary - Planet GS-5220-24T4XVR User Manual

APPENDIX B : GLOSSARY

A
ACE
ACE is an acronym for Access Control Entry. It describes access permission associated with a particular ACE ID.
There are three ACE frame types (Ethernet Type, ARP, and IPv4) and two ACE actions (permit and deny). The ACE
also contains many detailed, different parameter options that are available for individual application.
ACL
ACL is an acronym for Access Control List. It is the list table of ACEs, containing access control entries that specify
individual users or groups permitted or denied to specific traffic objects, such as a process or a program.
Each accessible traffic object contains an identifier to its ACL. The privileges determine whether there are specific
traffic object access rights.
ACL implementations can be quite complex, for example, when the ACEs are prioritized for the various situation. In
networking, the ACL refers to a list of service ports or network services that are available on a host or server, each with
a list of hosts or servers permitted or denied to use the service. ACL can generally be configured to control inbound
traffic, and in this context, they are similar to firewalls.
There are 3 web pages associated with the manual ACL configuration:
ACL|Access Control List: The web page shows the ACEs in a prioritized way, highest (top) to lowest (bottom).
Default the table is empty. An ingress frame will only get a hit on one ACE even though there are more matching ACEs.
The first matching ACE will take action (permit/deny) on that frame and a counter associated with that ACE is
incremented. An ACE can be associated with a policy, 1 ingress port, or any ingress port (the whole switch). If an ACE
Policy is created then that policy can be associated with a group of ports under the "Ports" web page. There are
number of parameters that can be configured with an ACE. Read the web page help text to get further information for
each of them. The maximum number of ACEs is 64.
ACL|Ports: The ACL Port configuration is used to assign a Policy ID to an ingress port. This is useful to group ports to
obey the same traffic rules. Traffic Policy is created under the "Access Control List". You can you also set up specific
traffic properties (Action / Rate Limiter / Port copy, etc) for each ingress port. They will though only apply if the frame
User's Manual of GS-5220-24T4XV(R) Managed LCD Switch
348