Planet GS-5220-24T4XVR User Manual page 221

 PCP
 DEI
 CoS ID
 Tag Class.
 DSCP Based

WRED Group

Ingress Map

Egress Map
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
User's Manual of GS-5220-24T4XV(R) Managed LCD Switch
The classified DPL can be overruled by a QCL entry.
Controls the default PCP value.
All frames are classified to a PCP value.
If the port is VLAN aware and the frame is tagged, then the frame is classified to
the PCP value in the tag. Otherwise the frame is classified to the default PCP
value.
Controls the default DEI value.
All frames are classified to a DEI value.
If the port is VLAN aware and the frame is tagged, then the frame is classified to
the DEI value in the tag. Otherwise the frame is classified to the default DEI
value.
Controls the default CoS ID
Every incoming frame is classified to a CoS ID, which later can be used as basis
for rewriting of different parts of the frame.
Shows the classification mode for tagged frames on this port.
Disabled: Use default
CoS
Enabled: Use mapped versions of
Click on the mode in order to configure the mode and/or mapping.
Note: This setting has no effect if the port is VLAN unaware. Tagged frames
received on VLAN unaware ports are always classified to the default CoS and
DPL.
Click to Enable DSCP Based QoS Ingress Port Classification.
Controls the WRED group membership.
Controls the Ingress Map selection through the Map ID. The Ingress Map ID
ranges from 0 to 255. An empty field indicates no map selection.
Controls the Egress Map selection through the Map ID. The Egress Map ID
ranges from 0 to 511. An empty field indicates no map selection
221
value.
and DPL for tagged frames.
PCP and DEI for tagged frames.