Planet GS-5220-24T4XVR User Manual page 33

Model Speed (Mbps)
MTB-LA20 10G
MTB-LB20
10G
MTB-LA40 10G
MTB-LB40
10G
MTB-LA60 10G
MTB-LB60
10G
It is recommended to use PLANET SFP/SFP+ on the Managed Switch. If you insert an SFP/SFP+
transceiver that is not supported, the Managed Switch will not recognize it.
1. Before we connect the GS-5220 series to the other network device, we have to make sure both sides of the SFP
transceivers are with the same media type, for example: 1000BASE-SX to 1000BASE-SX, 1000BASE-LX to
1000BASE-LX.
2. Check whether the fiber-optic cable type matches with the SFP transceiver requirement.

To connect to 1000BASE-SX SFP transceiver, please use the multi-mode fiber cable with one side being the male
duplex LC connector type.

To connect to 1000BASE-LX SFP transceiver, please use the single-mode fiber cable with one side being the male
duplex LC connector type.

Connecting the Fiber Cable
1. Insert the duplex LC connector into the SFP/SFP+ transceiver.
2. Connect the other end of the cable to a device with SFP/SFP+ transceiver installed.
3. Check the LNK/ACT LED of the SFP/SFP+ slot on the front of the Managed Switch. Ensure that the SFP/SFP+
transceiver is operating correctly.
4. Check the Link mode of the SFP/SFP+ port if the link fails. To function with some fiber-NICs or Media Converters, user
has to set the port Link mode to "10G Force", or "1000M Force".

Removing the Transceiver Module
1. Make sure there is no network activity anymore.
2. Remove the Fiber-Optic Cable gently.
3. Lift up the lever of the MGB module and turn it to a horizontal position.
4. Pull out the module gently through the lever.
User's Manual of GS-5220-24T4XV(R) Managed LCD Switch
Connector
Fiber Mode
Interface
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
Distance Wavelength (TX) Wavelength (RX) Operating Temp.
20km 1270nm
20km 1330nm
40km 1270nm
40km 1330nm
60km 1270nm
60km 1330nm
33
1330nm 0 ~ 60 degrees C
1270nm 0 ~ 60 degrees C
1330nm 0 ~ 60 degrees C
1270nm 0 ~ 60 degrees C
1330nm 0 ~ 60 degrees C
1270nm 0 ~ 60 degrees C