The page includes the following fields:
Object
Port
STP Enabled
Path Cost
Priority
AdminEdge
User's Manual of GS-5220-24T4XV(R) Managed LCD Switch
Figure 4-3-4-6 : STP CIST Port Configuration Page Screenshot
Description
The switch port number of the logical STP port.
Controls whether RSTP is enabled on this switch port.
Controls the path cost incurred by the port. The Auto setting will set the path cost
as appropriate by the physical link speed, using the 802.1D recommended
values. Using the Specific setting, a user-defined value can be entered. The
path cost is used when establishing the active topology of the network. Lower
path cost ports are chosen as forwarding ports in favor of higher path cost ports.
Valid values are in the range 1 to 200000000.
Controls the port priority. This can be used to control priority of ports having
identical port cost. (See above).
Default: 128
Range: 0-240, in steps of 16
Controls whether the operEdge flag should start as being set or cleared. (The
initial operEdge state when a port is initialized).
150