Table of Contents
Advertisement
Open the door and press the main power switch.
The main power switch
Open the door and press the main power switch. Also turn on the water
tap if it is turned off.
Select a program
To select a program, press one of the program buttons , or . You
can also select a program by pressing the navigation button
until the desired program is shown on the display.
Select a programme to suit the type of dishes and how dirty they are.
ECO wash
Use when you want to save water and energy. For normally soiled load,
such as plates, serving dishes, cups, glasses and so on.
Sanitation wash
An effective program for slightly dried leftovers. (This program is not
intended for burnt food, such as on oven dishes.)
Crystal glass
This program is intended for washing fragile glasses that have just
been used and do not require a particularly powerful wash. Porcelain
can also be washed using this program. See also Fragile dishes in the
chapter Loading the dishwasher.
Intensive
Program for very dirty dishes, such as pans, casserole dishes and
oven dishes. If these dishes do not completely fill the dishwasher, you
can add plates and the like.
Quick wash
This program is used for glasses and porcelain that is slightly dirty,
such as coffee cups.
Rinse and hold
Used to rinse dishes while you wait for the dishwasher to become fully
loaded.
2)
Heavy wash
Use to wash normally soiled load, such as plates, serving dishes, cups,
glasses and so on.
2)
Sani A wash
This program is ideal to use when hygiene demands are set high. The
temperature of the main wash is 60 °C. The final rinse is 85 °C for 4
minutes.
2)
Sani B wash
Choose Sani B wash if you want a quicker program that still fulfils
hygiene demands. The temperature of the main wash is 60 °C. The
final rinse is 85 °C for 4 minutes.
2)
Program button / / . The programs pre-assigned to the program buttons can be changed. See Chapter Settings.
Select the program
Self-cleaning
Self-cleaning programme for hygienic cleaning of the dishwasher tub,
spray arms and spray pipes.
This program should be run (with no dishes in the machine) using
normal dishwasher detergent or citric acid. Special dishwasher cleaners
are also available on the market. For the removal of lime scale deposits,
see The dishwasher tub in Chapter Care and cleaning.
or
START
Press Start/Stop until the display shows "Program started, close door".
This indicates that the dishwasher is ready to start. Close the door
properly, otherwise the dishwasher will not start.
If the dishwasher is not started or the door is not closed within 2 minutes
of the last button press, the machine switches off.
Time remaining
Once you have chosen a program, the time the program took when
last used is displayed.
Once you have started the dishwasher, the display shows the remaining
program time. The remaining time is updated after the water for the
final rinse has been heated.
This may differ somewhat from time to time depending on the
temperature of the water supply, the amount of dishes, the ambient
temperature and other factors.
During the first run of each program, the remaining time displayed can
be slightly misleading, as the dishwasher is estimating the time. When
you run the program a second time, the dishwasher will calculate the
remaining time based on the previous duration of the program.
Status indicator
The status indicator on the front display provides information by means
of different colours.
Activate the Info in front display setting. See the chapter Settings.
Blue - Load more
The program has started, but you can still load more dishes.
Eco
Eco
2:00
2:15
58°C
Speed mode
Select from more programs
Starting the dishwasher
STOP
0:21
Time remaining
Starting the dishwasher
START
STOP
9
Advertisement
Table of Contents
