MSI RS482M4-CSIP Manual page 58

BIOS Setup
Resume By PS/2 Keyboard
The item specifies how the system will be awakened from power saving mode
when input signal of the PS2 keyboard is detected. Use the <PageUp> &
<PageDown> keys to select the options. When selecting [Password], enter the
desired password. Setting options: [Password], [Any Key], [Disabled].
Keyboard Password
If Resume By PS/2 Keyboard is set to Password, then you can set a pass-
word in the field for the PS/2 keyboard to power on the system.
Resume By PS/2 Mouse
This setting only works Resume By PS/2 KB is set to [Hot Key]. This setting
determines whether the system will be awakened from what power saving
modes when input signal of the PS/2 mouse is detected. Setting options: [Disabled],
[Enabled].
Resume by PCI Device (PME#)
When setting to [Enabled], this setting allows your system to be awakened from
the power saving modes through any event on PME (Power Management Event).
Setting options: [Disabled], [Enabled].
Resume by PCIE Device (PME#)
When setting to [Enabled], this setting allows your system to be awakened from
the power saving modes through any event on PME (Power Management Event).
Setting options: [Disabled], [Enabled]
Resume by RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 state. Setting options: [Disabled],
[Enabled].
Date (of Month)
When Resume by RTC Alarm set to [Enabled], the field specifies the date for
Resume by RTC Alarm.
Time (HH:MM:SS)
You can choose what hour, minute and second the system
3-17