MSI RS482M4-CSIP Manual page 48

If you select [Manual], related information is asked to be entered to the following
items. Enter the information directly from the keyboard. This information should be
provided in the documentation from your hard disk vendor or the system manufacturer.
[Access Mode]
[Capacity]
[Cylinder]
[Head]
[Precomp]
[Landing Zone]
[Sector]
Drive A
This item allows you to set the type of floppy drives installed. Available options:
[None], [360K, 5.25 in.], [1.2M, 5.25 in.], [720K, 3.5 in.], [1.44M, 3.5 in.], [2.88M, 3.5 in.].
Halt On
The setting determines whether the system will stop if an error is detected at boot.
Available options are:
[No Errors]
[All, But Keyboard]
The settings are [CHS], [LBA], [Large], [Auto].
The formatted size of the storage device.
Number of cylinders.
Number of heads.
Write precompensation.
Cylinder location of the landing zone.
Number of sectors.
The system doesn't stop for any detected error.
The system doesn't stop for a keyboard error.
BIOS Setup
3-7