Powering On/Off The Projector; Powering On The Projector - Optoma DS512 Manual

Powering On/Off the Projector

Turn on the
v
projector first
and then
select the
signal sources.

Powering On the Projector

. Connect the power cord to the projector.
. Turn On the connected devices.
3. Ensure the Power LED is flashing and then press the POWER
button to turn On the projector.
The projector's startup logo screen displays and connected
devices are detected. If the connected device is a PC, press the
appropriate keys on the computer keyboard to switch the
display output to the projector. (Check the user manual of the
PC to determine the appropriate Fn key combination to change
display output.)
See Security Settings on page 36 if security lock is enabled.
4. If more than one input device is connected, press the "Source"
button sequentially to switch between devices.
(DVD and HDTV are supported through the VGA connector)
Installation
5
English