Adjusting the Projected Image
Adjusting the Projector's Height
The projector is equipped with elevator foot for adjusting the image
height.
To raise the image:
. Press the elevator button u.
. Raise the projector to the desired height using the Elevator
Foot v, then release the button to lock the elevator foot into
position.
3. Use the Tilt-Adjustment Foot w to fine-tune the display angle.
To lower the image:
. Press the elevator button.
. Lower the image, then release the button to lock the elevator
feet into position.
3. Use Tilt-Adjustment Foot w to fine-tune the display angle.
1
2
Adjusting the Focus
To focus the image, rotate the focus ring until the image is clear.
The projector will focus at distances from 3.3 to 3.8 feet (.0 to
0 meters).
Installation
3
7
English