Set Day And Time; Adjust Temperature (Temporary Hold); Adjusting Comfort Activities - International comfort products Ion SYST0101CW Owner's Manual

NOTE: AUTO mode is intended to switch between heating and cooling modes based on
temperature demand. A gradual auto transition is the energy- - conscious default that will satisfy
the majority of customers. For Iont Zoning systems, some customers might have significant
and simultaneous heating and cooling demands in different zones. To address this need, a
special simultaneous heating and cooling demand auto mode could be enabled by the Installer.
When the feature is enabled and AUTO mode is selected, the simultaneous heating and cooling
demand auto mode will alternate between heating and cooling, depending on demand, every
half hour. This may result in higher energy usage but provide the benefit of greater comfort.
Your installing contractor is able to enable this feature, if desired. (This feature is only
available with zoned systems).
S If HEAT is selected then the Iont System Control operates only the heating sys-
tem.
S If COOL is selected then the Iont System Control operates only the cooling sys-
tem.
S If FAN ONLY is selected, then the Iont System Control operates the indoor fan but
heating, cooling, humidification or dehumidification will not take place.

Set Day and Time

S To set the day and time for your home screen enter the Main Screen by touching
anywhere on the Control.
S Touch the DAY and TIME label located at the top middle of the screen or access by
going through the menu screen (see Pg. 26).
S To set the HOUR, MINUTE, MONTH, DAY, or YEAR touch the feature you wish
to change.
S Use the Up (Y) and Down (B) buttons to make the appropriate changes.
S When you have completed all of the settings, touch SAVE.
S If you make a mistake you may touch CANCEL and begin again.

Adjust Temperature (Temporary Hold)

The Iont System Control allows you to temporarily override your programmed schedule by
adjusting the indoor temperature at any time to meet your needs.
NOTE: The Iont System may seem slow to react to set point, activity and system mode
changes. This is normal, as the system will ramp up capacity and fan speeds slowly to achieve
the proper level of home conditioning, while avoiding wasting energy, stressing home circuits
and dimming lights with a "hard start."
Adjusting Comfort Activities (See Comfort Profiles on Pg. 9)
S To adjust the comfort activity, enter the Main Screen by touching anywhere on the
Control.
4