Adjusting Heating; Adjusting Cooling - International comfort products Ion SYST0101CW Owner's Manual

S Touch the activity/top button under the activity feature on the left side of the screen;
then select the desired activity of HOME, AWAY, SLEEP, or WAKE.
S Use the Up (Y) and Down (B) buttons to change the time to temporarily hold the
desired temperature in 15 minute increments.
S When the correct time interval is displayed, touch DONE.
S To return to the scheduled program, touch HOLD UNTIL, and then select PER
SCHEDULE.

Adjusting Heating

NOTE: If OFF is selected, the Heat, Cool, Auto and Fan Only will not be available. When
changing from the OFF mode to Heat, Cool, Auto, or Fan Only, it is normal for the system to
run the blower for a minute or two. During this time, the system is using the filter check feature
to determine the filter usage. This feature is part of the system design and cannot be turned off.
S To adjust the heating temperature, enter the Main Screen by touching anywhere on
the Control.
S With the system in either AUTO or HEAT mode, use the Up (Y) and Down (B)
buttons to set the desired temperature.
S On the left hand side of the screen, the comfort profile will switch to manual, and
the system will be placed in a temporary hold.
S Use the Up (Y) and Down (B) buttons to change the time to temporarily hold the
desired temperature in 15 minute increments.
S When the correct time interval is displayed, touch DONE.
S To return to the scheduled program, touch HOLD UNTIL, and then select PER
SCHEDULE.

Adjusting Cooling

S To adjust the cooling temperature, enter the Main Screen by touching anywhere on
the Control.
S With the system in either AUTO or COOL mode, use the Up (Y) and Down (B)
buttons to set the desired temperature.
S On the left hand side of the screen, the comfort profile will switch to manual, and
the system will be placed in a temporary hold.
S Use the Up (Y) and Down (B) buttons to change the time to temporarily hold the
desired temperature in 15 minute increments.
S When the correct time interval is displayed, touch DONE.
S To return to the scheduled program, touch HOLD UNTIL, and then select PER
SCHEDULE.
5