Demand Settings
When a demand response is received from the utility company, the heating and cooling set
points will be adjusted according to the absolute temperature or offset shown here. If the set
point at the time of the event is more favorable (uses less energy) than what you have
programmed, the Iont System Control will use the more favorable set point for the duration of
the event.
Response Limits
Response limits are minimum heating and maximum cooling temperatures allowed during a
utility event. These limits are not exceeded and are intended to protect the occupant premises
from extreme temperatures that might otherwise be imposed by a utility event. Unless
otherwise indicated, all settings temperatures will be shown in Fahrenheit degrees.
45
A14265
A14266
A14267