Table of Contents
Advertisement
S If applicable, select the amount of fresh air to circulate during cooling mode by
touching COOLING FRESH AIR. Again, you will have the option of choosing
among AUTO, MANUAL and OFF.
Use the Up (Y) and Down (B) buttons to set the desired ventilation speed
d
level.
Press SAVE when finished, or CANCEL to discard any changes.
d
Vacation Comfort Profile Humidity Control
You may wish to have different humidity settings when you're on Vacation. Press the Menu
area on the Main Screen to access the additional menu selections. Select Comfort Profiles,
then select Humidity and Fresh Air Profiles option.
S Touch VACATION to set your humidity settings while you are on vacation to save
the most amount of energy.
S If you have a humidifier installed for your system, touch HEATING HUMIDITY
to set the desired humidity level when you are away from home.
Use the Up (Y) and Down (B) buttons to set the minimum humidity level
d
between 5%- - 45%.
Press SAVE when finished, or CANCEL to discard any changes.
d
S To set the desired humidity level during cooling, touch COOLING HUMIDITY.
Use the Up (Y) and Down (B) buttons to set the maximum dehumidification
d
level at NONE or between 55- - 65%.
Touch YES or NO for the system to over- - cool the conditioned space by up to
d
3_ F to remove as much humidity out of the air as possible.
Press SAVE when finished, or CANCEL to discard any changes.
d
Vacation Comfort Profile Fresh Air Control
S If a ventilator is installed in your home, select the amount of fresh air to circulate
during heating mode by touching HEATING FRESH AIR.
S You will have the option of choosing between AUTO, MANUAL, or OFF.
NOTE: This option may not be available with the ERVXXNVA ventilator due to its simplified
Control design.
14
A14248
Advertisement
Table of Contents
