Set Up A Dynamic Dns Service Account - TP-Link Archer AX10 User Manual

Chapter 12
2. Click
IP for. Then the
of the client device manually.
3. Enter the
4. Click SAVE.

12. 4. Set Up a Dynamic DNS Service Account

Most ISPs assign a dynamic IP address to the router and you can use this IP address
to access your router remotely. However, the IP address can change from time to time
and you don't know when it changes. In this case, you might apply the DDNS (Dynamic
Domain Name Server) feature on the router to allow you and your friends to access your
router and local servers (FTP, HTTP, etc.) using a domain name without checking and
remembering the IP address.
Note: DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
3. Select the DDNS
to select TP-Link so that you can enjoy TP-Link's superior DDNS service. Otherwise,
please select NO-IP or DynDNS. If you don't have a DDNS account, you have to
register first by clicking
Note: To enjoy TP-Link's DDNS service, you have to log in with a TP-Link ID. If you have not logged in with one, click
log in.
4. Click
Domain Name
Downloaded from ManualsNet.com
VIEW CONNECTED DEVICES
MAC Address
IP address to reserve for the client device.
Advanced > Network >
Service Provider: TP-Link, NO-IP or DynDNS. It is recommended
Register
Register in the Domain Name List
as needed.
search engine
and select the you device you want to reserve an
will be automatically filled in. Or enter the
Dynamic DNS.
Now.
if you have selected TP-Link, and enter the
Customize Your Network Settings
MAC address
62