TP-Link Archer AX10 User Manual page 70

Chapter 12
• To enable or disable the wireless function:
1. Go to
2. The wireless function is enabled by default. If you want to disable the wireless function
of the router, just untick the
all the wireless settings will be invalid.
• To change the wireless network name (SSID) and wireless password:
1. Go to
2. Create a new SSID in
network in Password. The value is case-sensitive.
Note: If you change the wireless settings with a wireless device, you will be disconnected when the settings are
effective. Please write down the new SSID and password for future use.
• To hide SSID:
1. Go to
2. Select
networks on your wireless device and you need to manually join the network.
• To use the Smart Connect function:
The Smart Connect function lets you to enjoy a more high-speed network by assigning
your devices to best wireless bands based on actual conditions to balance network
demands.
1. Go to
2. Enable
3. Keep the default values or set a new SSID and password, and click SAVE. This SSID
and password will be applied for the 2.4GHz and 5GHz wireless networks.
• To change the security option:
1. Go to
2. Select an option from the
the default settings unless necessary.
In addition
• Transmit Power
The default and recommended setting is High.
• Channel Width
Downloaded from ManualsNet.com
Wireless or Advanced >
Enable
Wireless or Advanced >
Network Name (SSID)
Wireless or Advanced >
Hide SSID, and your SSID won't display when you scan for local wireless
Advanced > Wireless >
Smart Connect.
Advanced > Wireless >
Security
- Select either High,
- Select a channel width (bandwidth) for the wireless network.
search engine
Wireless > Wireless Settings.
checkbox of each wireless network. In this case,
Wireless > Wireless Settings.
and customize the password for the
Wireless > Wireless Settings.
Wireless Settings.
Wireless Settings.
drop-down list. We recommend you don't change
Middle or Low to specify the data transmit power.
Customize Your Network Settings
66