FujiFilm Tieline Apeos C7070 Reference Manual page 14

3.
When loading paper whose size is JIS B4 or larger, pinch the
knob and lift the paper rear end guide, and set the guide into
the hole for the indicated size.
4.
Pinch the two Guide Clips, and adjust to the correct paper
size.
5.
Fan a stack of paper, face the print surface up, and then load
the paper with edges aligned according to the direction of the
arrow.
Important
Do not load paper above the maximum fill line. It may cause
paper jams or machine malfunction.
Note
Adjust the guide correctly to the paper size. If the guide is not
adjusted correctly, the machine cannot feed the paper properly,
resulting in paper jams.
6.
Push in the Paper Tray.
Setting special paper and other media
Hole punched paper
Paper orientation: Load paper with holes facing the left side when viewed from the front of the
machine
Postcards
Paper orientation: SEF
Envelopes
Usable tray: Tray 1 (C7070/C6570/C5570/C4570), Tray 2 (C3570/C3070)
Paper orientation when the flaps are open: Flaps come at the right when viewed from the front of the
machine
Paper orientation when the flaps are closed: Flaps come at the left when viewed from the front of the
machine
Note
Load envelopes with glue or seal as the flap is closed.
Paper size (mm)
14
3 Basic Operations of the Machine
Width 90 to 241
Length 98 to 372
3
2
1