Table of Contents
Advertisement
3 Get started
Caution
•
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect AC power
Caution
•
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage
printed on the back or the underside of the
unit.
Warning
•
Risk of electric shock! When you disconnect
the AC power, always pull the plug from the
socket. Never pull the cord.
Note
•
Install the apparatus near the power supply
socket and where the AC power plug can be
easily reached.
1
Connect the power cord to the AC~
MAINS socket on the apparatus and to
the power supply socket.
Note
•
To save energy: After use, set the switch to
OFF.
Install batteries
Note
•
You can use both batteries and AC power as
power supply of this apparatus.
•
Batteries are not supplied with the accessories.
1
Open the battery compartment.
2
Insert 6 x 1.5V R14/UM-2/C-cell batteries
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
EN
9
Advertisement
Table of Contents
