Table of Contents
Advertisement
Program play sequence
You can program up to 20 tracks in the desired
sequence.
1
In stop mode, press PROG to start to
program play sequence.
» [PROG] and [P01] are displayed.
For MP3-CDs: press
»
select an album.
2
Press
/
to select a track.
3
Press PROG to program the track.
» [PROG] and [P02] are displayed.
4
Repeat steps 2 to 4 to select and program
all tracks.
When all 20 tracks are stored, no more
»
tracks can be selected and the display
shows [FUL].
5
To play program, press
•
In stop mode, press and hold
to browse programmed tracks.
6
To delete program, press
» [CLr] is displayed.
Listen to an external device
You can listen to an MP3 player through this
apparatus.
Note
•
When you connect an external device to
LINK jack, the apparatus switches to MP3
LINK source automatically.
1
Use a cable with 3.5mm plugs on both
ends (not supplied) to connect MP3 LINK
jack (3.5mm) on this apparatus and the
headphone jack on an MP3 player.
- ALBUM + to
.
PROG
in stop mode.
MP3
Listen to radio
1
Switch the FM/MW selector to FM or
MW.
2
Turn TUNING+/- until you find optimal
reception.
Tip
•
To improve FM reception, you can extend,
incline or turn the telescopic antenna for best
reception.
•
To improve MW reception, turn the apparatus
to face a different direction.
EN
11
Advertisement
Table of Contents
