TP-Link Archer C20 User Manual page 8

Chapter 1
Power On/Off Button
Reset Button
Wi-Fi/WPS Button
WAN Port
Ethernet Ports (1/2/3/4)
Antennas
Downloaded from ManualsNet.com
Item
Press this button to power on or off the router.
Press and hold this button until all the LEDs turn on momentarily to reset the router to
its factory default settings.
Press this button, and immediately press the WPS button on your device. The WPS
LED of the router should change from flashing to solid on, indicating successful WPS
connection.
Press and hold this button for more than 5 seconds to turn on or off the wireless
function of your router.
For connecting to a DSL/Cable modem, or an Ethernet port.
For connecting your PCs or other wired network devices to the router.
Used for wireless operation and data transmitting. Upright them for the best Wi-Fi
performance.
search engine
Get to Know About Your Router
Description
5