TP-Link Archer C20 User Manual page 30

Chapter 4
• Disable Wireless Security
If disabled, wireless clients can connect to the router without a password. It's strongly
recommended to choose one of the following modes to enable security.
• WPA-PSK/WPA2-Personal
shared passphrase.
•
•
•
•
• WPA /WPA2-Enterprise
•
•
•
•
Downloaded from ManualsNet.com
- The wireless security function can be enabled or disabled.
- It's the WPA/WPA2 authentication type based on pre-
Authentication Type - Select Auto,
Encryption - Select Auto,
Wireless Password - Enter ASCII or Hexadecimal characters. For Hexadecimal,
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
- It's based on Radius Server.
Authentication Type - Select Auto,
Encryption - Select Auto,
Radius Server IP - Enter the IP address of the Radius server.
Radius Server Port - Enter the port that Radius server used.
search engine
WPA-PSK or WPA2-PSK.
TKIP or AES.
- Specify the group key update interval in seconds.
WPA or WPA2.
TKIP or AES.
Configure the Router
27