Access Control - TP-Link Archer C20 User Manual

Chapter 4

4. 10. Access Control

Access Control is used to deny or allow specific client devices to access your network
with access time and content restrictions.
I want to:
How
can I do
that?
Downloaded from ManualsNet.com
Deny or allow specific client devices to access my network with
access tiem and content restrictions.
For example, If you want to restrict the internet activities of host
with MAC address 00-11-22-33-44-AA on the LAN to access
www.tp-link.com only, please follow the steps below:
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to
1 ) Click
2 ) Select
description (e.g. host_1) for the host in the
field and enter 00-11-22-33-44-AA in the
filed.
3 ) Click Save.
3. Go to
settings:
1 ) Click
2 ) Select
description (e.g. target_1) for the target in the
Description
full name or the keywords (for example TP-Link) in the
Add URL Address
Note:
Any URL address with keywords in it (e.g. www.tp-link.com) will be
blocked or allowed.
search engine
Access Control > Host and configure the host settings:
Add New.
MAC Address as the mode type. Create a unique
Access Control > Target
Add New.
URL Address as the mode type. Create a unique
field and enter the domain name, either the
field.
Configure the Router
Description
MAC Address
and configure the target
Target
45