Installation Guidelines - Elation FUZE SFX User Manual

Hide thumbs Also See for FUZE SFX:

Table of Contents

I N S TA L L AT I O N G U I D E L I N E S

FLAMMABLE MATERIAL WARNING

Keep fixture minimum 5.0 feet (1.5m) away from flammable materials and/or

pyrotechnics.

ELECTRICAL CONNECTIONS

A qualified electrician should be used for all electrical connections and/or

installations.

USE CAUTION WHEN POWER LINKING OTHER MODEL FIXTURES AS THE POWER

CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX POWER

OUTPUT ON THIS FIXTURE. CHECK SILK SCREEN FOR MAX AMPS.

MINIMUM DISTANCE TO OBJECTS/SURFACES

MUST BE 1 FOOT (0.3 METERS)

MINIMUM DISTANCE OF INFLAMMABLE MATERIALS

FROM THE SURFACE IS 1.6 FEET (0.5 METER)

MAXIMUM AMBIENT TEMPERATURE 113° F (45°C)

DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!

Fixture MUST be installed following all local, national, and country commercial electrical and

construction codes and regulations.

Before rigging/mounting a single fixture or multiple fixtures to any metal truss/structure or

placing the fixture(s) on any surface, a professional equipment installer MUST be consulted

to determine if the metal truss/structure or surface is properly certified to safely hold the

combined weight of the fixture(s), clamps, cables, and accessories.

Overhead rigging requires extensive experience, including amongst others calculating working

load limits, understanding of the installation material being used, and periodic safety inspection

of all installation material and the fixture. If you lack these qualifications, do not attempt the

installation yourself. Improper installation can result in bodily injury.

Fixture(s) should be installed in areas outside walking paths, seating areas, or away from areas

were unauthorized personnel might reach the fixture by hand.

NEVER stand directly below the fixture(s) when rigging, removing or servicing.

Overhead fixture installation must always be secured with a secondary safety attachment,

such as an appropriately rated safety cable.

Allow approximately 15 minutes for the fixture to cool down before servicing.

Table of Contents

Fuze sfx wh