Elation FUZE SFX User Manual page 18

I N S TA L L AT I O N G U I D E L I N E S
OMEGA BRACKETS INSTALLATION
Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the
Omega Brackets to the fixture by turning each quick-lock fastener ¼ turn clockwise; making
sure the fastener is completely locked. Omega Brackets can be installed into the fixture base
as illustrated below.
SAFETY CABLE
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS
FIXTURE IN A SUSPENDED ENVIRONMENT TO ENSURE FIXTURE
WILL NOT DROP IF MOUNTING / RIGGING HARDWARE FAILS
CLAMP INSTALLATION (NOT INCLUDED)
When mounting fixture to truss, be sure to secure an appropriately rated professional grade
rigging clamp to the included Omega Brackets using an M10 screw fitted through the center
hole of the Omega Brackets. The fixture provides a built-in rigging point for a SAFETY CABLE.
Be sure to only use one of the designated rigging points for the safety cable and never secure
a safety cable to the Pendant or Yoke Brackets.
RIGGING
Overhead rigging requires extensive experience, including amongst others calculating working
load limits, installation material being used, and periodic safety inspection of all installation
material and the fixture. If you lack these qualifications, do not attempt the installation
yourself. Improper installation can result in bodily injury. Fixture is fully operational in the
specific mounting positions illustrated below.
18