Handle The Cartridge Carefully; Ensure Proper Packaging; Checking For Gaps In The Seams Of A - IBM System Storage TS2250 Setup, Operator, And Service Manual

Figure 4-4. Checking for gaps in the seams of a cartridge
v Check that the leader pin is properly seated (see 2 in Figure D-2 on page D-2).
v If you suspect that the cartridge has been mishandled but it appears usable,
v Review handling and shipping procedures.

Handle the Cartridge Carefully

v Do not drop the cartridge. If the cartridge drops, slide the cartridge door back
v Do not handle tape that is outside the cartridge. Handling the tape can damage
v Do not stack more than six cartridges.
v Do not degauss a cartridge that you intend to reuse. Degaussing makes the tape

Ensure Proper Packaging

v When shipping a cartridge, use the original or better packaging.
v Always ship or store a cartridge in a jewel case.
v Use only a recommended shipping container that securely holds the cartridge in
4-8
TS2250 Tape Drive Setup, Operator and Service manual
dislodged. Go to Appendix D, "Repairing a Cartridge," on page D-1.
copy any data onto a good cartridge immediately for possible data recovery.
Discard the mishandled cartridge.
and ensure that the leader pin is properly seated in the pin-retaining spring clips
(see 2 in Figure D-1 on page D-2). If the leader pin has become dislodged, go
to Appendix D, "Repairing a Cartridge," on page D-1.
the tape's surface or edges, which may interfere with read or write reliability.
Pulling on tape that is outside the cartridge can damage the tape and the brake
mechanism in the cartridge.
unusable.
its jewel case during transportation. Ultrium Turtlecases (by Perm-A-Store) have
been tested and found to be satisfactory . They are available at
http://www.turtlecase.com.