Microscope Camera Operation; Observation Of Microscope Camera Images; Data Acquisition And Storage - Olympus SZX-AR1 Software Help

Hide thumbs Also See for SZX-AR1:

Table of Contents

1.6　Microscope camera operation

■

① To display the live screen of the microscope camera,

click [Start].

Reference

If you start up the app with the camera connected,

it will start up in the live start state.

■

(a) To take a snapshot, click [Snap] while the

observation status is [Live].

If you want to record it, click [Start Rec.] while the

observation status is [Live].

If you want to save the picture with AR display, check

the [Save with AR] checkbox.

(b) Auto save disabled state

Immediately after taking a snapshot or stopping

recording, a save dialog will appear.

Click the [gear mark] to display the Save Settings

screen, where you can configure settings for

automatic saving.

After you click [Snap] or stop recording, the data will

be automatically saved according to the save settings.

Reference

･The formats that can be saved are as follows

　- Picture: .bmp, .jpeg (.jpg), .png

　- Video: .mp4, .mov

･Depending on the PC load during recording, the

following phenomena may occur.

　- Delay or skipping of recorded video

　- Delay or skipping of recorded audio

　- Video and audio delay or skipping in video

playback

1　Operation procedure of the software

Table of Contents