Combining With The Microscope Frame (Bx53F2) And U-Ifres - Olympus U-CBS Instructions Manual

1

Combining with the microscope frame (BX53F2) and U-IFRES

Coded revolving nosepiece
U-IFRES
Cable holder*
Align with the upper left
corner of the label.
About 85 mm
Align with the height of
the edge between the
back side and under back side and under
side on the microscope side on the microscope
frame. frame.
Hand switch*
Cable holder*
* :In case of laid out the cable for hand switch on the left side as shown above picture
**:In case of laid out the cable for hand switch on the right side as shown above picture
7
For procedures to attach the hand switch to microscope frame, see page 11.
TIP
Coded function system
Coded illuminator
RS-232C cable
Cable holder**
About 69 mm
Velcro tape
(provided with hand switch)
Hand switch**
About 78 mm
AC adapter