Table of Contents
Advertisement
Quick Links
CERAMIC COOKTOP
Model:
CR2B228T
User Manual
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS
Write Model and Serial Numbers
here:
Summit Division of Felix Storch, Inc.
An ISO 9001:2015 registered company
Model: _____________________
770 Garrison Avenue
Serial No.: __________________
Bronx, NY 10474
www.summitappliance.com
Advertisement
Table of Contents
Related Manuals for Summit CR2B228T
Summary of Contents for Summit CR2B228T
- Page 1 User Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS Write Model and Serial Numbers here: Summit Division of Felix Storch, Inc. An ISO 9001:2015 registered company Model: _____________________ 770 Garrison Avenue Serial No.: __________________ Bronx, NY 10474...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Appliance Safety Important Safeguards Location of Parts Technical Information Installation of your Appliance Before Using your Cooktop Installation Connecting the Cooktop to the Power Supply Operating your Cooktop 10-12 Control Panel Choosing the Proper Cookware Using your Cooktop Using the Timer Using the Child Lock Special Functions... -
Page 3: Appliance Safety
APPLIANCE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or injure you and others. - Page 4 • To protect against electrical shock, do not immerse cord or body of unit in water or other liquid. • Close supervision is necessary when any appliance is used by or near children. • Do not operate any appliance with a damaged cord or after the appliance malfunctions or has been damaged in any manner.
-
Page 5: Location Of Parts
temperature. • Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Units – To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward and does not extend over adjacent surface units. -
Page 6: Installation Of Your Appliance
INSTALLATION OF YOUR APPLIANCE Before Using your New Cooktop • Carefully review this User Manual, taking special note of the 'Safety Warnings' section. • Remove any protective film that may still be on your cooktop. CAUTION: Please read this section prior to making the cut out for your cooktop. It is important to plan ahead for the installation of your cooktop, keeping the listed dimensions in mind. - Page 7 CAUTION: To eliminate the risk of burns by reaching over heated surface units, cabinet storage space located above surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5”...
-
Page 8: Connecting The Cooktop To The Power Supply
Placing your Cooktop into the Cut Out 1. Stretch out the supplied seal along the underside edge of the cooktop, ensuring the ends overlap at the corners. 2. Do not use an adhesive to fix the cooktop into the worktop. Once the seal is fitted, position the cooktop into the cutout in the worktop. - Page 9 NOTE: Use the 3-wire cable from the power supply, where local codes permit, connecting the frame- ground conductor to the neutral (blue) junction box wire. 1. Disconnect the power supply. 2. Remove the junction box cover if present 3. Connect the flexible cable conduit (3) from the cooktop to the junction box (4) using a UL listed or CSA approved conduit connector (7).
-
Page 10: Operating Your Cooktop
OPERATING YOUR COOKTOP Control Panel • The controls respond to touch, so you don't need to apply any pressure. • Use the ball of your finger, not its tip, as show below: • You will hear a beep each time a touch is registered. •... -
Page 11: Using Your Cooktop
Using your Cooktop 1. Place a pan on the cooking zone you wish to use. Make sure the cooking surface and the bottom of the pan are clean and dry. 2. Press and hold the ON/OFF key for two seconds. The cooktop will alert you with a single beep once it has powered on. -
Page 12: Special Functions
Special Functions Over-heating Protection A sensor monitors the temperature in the cooking zones. When the temperature exceeds a safe level, the cooking zone is automatically switched off. Residual Heat Indicator The cooktop will remain hot after use, especially if you have been using the cooktop for a prolonged period of time. -
Page 13: Care And Maintenance
CARE AND MAINTENANCE • Do not use a steam cleaner to clean this appliance. Steam could penetrate electrical components and cause a short circuit. • Pressurized steam could cause permanent damage to the surface and to components for which the manufacturer cannot accept responsibility. •... -
Page 14: Limited Warranty
(Metallic) which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov Note: Nickel is a component in all stainless steel and some other metallic compositions. Summit Division of Felix Storch, Inc. An ISO 9001:2015 registered company For parts and accessory ordering, 770 Garrison Avenue...