Summit CR2B23T3B User Manual

2-burner electric cooktops
Hide thumbs Also See for CR2B23T3B:

Advertisement

2-Burner Electric Cooktops
CR2B23T3B
CR2B23T4W
 Please read this manual carefully before use and keep it in a safe place for future
reference.
 Some figures in this manual are for reference only and may not exactly match the
product you purchased.
Models:
USER'S MANUAL
1
CR2B15T1B
CR2B15T2W
FELIX STORCH, INC.
An ISO 9001:2008 registered company
770 Garrison Avenue
Bronx, New York 10474
www.summitappliance.com

Advertisement

Table of Contents
loading

Summary of Contents for Summit CR2B23T3B

  • Page 1 2-Burner Electric Cooktops Models: CR2B23T3B CR2B15T1B CR2B23T4W CR2B15T2W USER’S MANUAL  Please read this manual carefully before use and keep it in a safe place for future reference.  Some figures in this manual are for reference only and may not exactly match the product you purchased.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Important Safeguards ..................3 – 5 Electrical safety ..................... 3 Safety during use ..................3 – 4 Safety when cleaning ..................4 How to avoid damaging the appliance ............4 Pots and pans ....................5 Installation ......................6 – 8 Appliance and cut-out dimensions ..............
  • Page 3: Important Safeguards

    IMPORTANT SAFEGUARDS WARNING: INSTALLATIONS MUST COMPLY WITH ALL LOCAL, STATE AND NATIONAL ELECTRICAL CODES. This appliance must be properly installed and grounded by a qualified technician. Failure to comply with the applicable codes may result in fire, property damage, personal injury or death.
  • Page 4: Safety When Cleaning

    7. Never place combustible items on the cooktop. 8. You must not keep any combustible items such as aerosol cans in a drawer located under the cooktop. Likewise, do not keep items made of plastic with a low melting point in a drawer below the cooktop.
  • Page 5: Pots And Pans

    Pots and pans The better the pot, the better the cooking results. 1. You can recognize good pots and pans by their bases. The base should be as thick and flat as possible. 2. When buying new pots and pans, pay particular attention to the diameter of the base. Manufacturers often only state the diameter of the rim.
  • Page 6: Installation

    INSTALLATION Important! This new appliance may only be installed and connected by a registered specialist. Please observe these instructions; otherwise the warranty will not cover any damage that may occur.  Appliance dimensions Width 290mm (11.42”) 520mm (20.5”) Depth Height 50mm (2.0”) ...
  • Page 7: Electrical Connections

    PROVIDING THE ELECTRICAL CONNECTION Install the junction box under the cabinet and run either a 120 volt AC wire (for models CR2B15T1B and CR2B15T2W) or a 220-240 volt AC wire (for models CR2B23T3B and CR2B23T4W) from the main circuit panel.
  • Page 8 WARNING! Electrical grounding is required on this appliance. This appliance is manufactured with a supply wire and a frame-connected grounding wire. NOTE TO ELECTRICIAN: The armored cable leads supplied with the appliance are UL-listed for connection to larger gauge household wiring. The insulation of the leads is rated at temperatures much higher than the temperature rating of household wiring.
  • Page 9: Cooking Zones And Controls

    COOKING ZONES AND CONTROLS Models CR2B23T3B & CR2B23T4W Single cooking zone 6.9” (175mm) 1800W/230V Single cooking zone 5.5” (140mm) 1200W/230V Residual heat indicators – / +...
  • Page 10 Models CR2B15T1B & CR2B15T2W Single cooking zone 5.5” (140mm) 1200W/120V Single cooking zone 5.5” (140mm) 1200W/120V Residual heat indicators Cooking zone Cooking zone TIMER Child Lock –/+ ON/OFF 1200W (140mm) 1200W (140mm) 1200W/120V 1200W/120V  Cooking zones: The appliance is fitted with ceramic glass. ...
  • Page 11: Operating Instructions

     Control and function indicators: Digital indicators provide information about settings made, functions activated, as well as any residual heat of the corresponding cooking zone.  Safety cut-off: A safety cut-off ensures that all cooking zones switch off if the ON/OFF key is pressed, but no power levels are selected within 1 minute.
  • Page 12: Residual Heat Indicators

     Heat Level Setting To select the appropriate cooking zone and set the heat level, touch the corresponding cooking zone key. Touch the cooking zone key once, and the default digital display shows [ 5 ]. Keep touching the key of the desired cooking zone, and the heating level will loop through the settings from [0] to [9].
  • Page 13: Care And Cleaning

    CARE AND CLEANING Cleaning the cooktop Only use an approved ceramic cooktop cleaner on the glass cooktop. Other creams may not be as effective or they might damage the surface with scratches or permanent staining. To maintain and protect the surface of your glass cooktop, follow these steps: ①...
  • Page 14: Metal Marks And Scratches

    520mm (20.5”) Depth Height 50mm (2.0”)  Worktop cut-out dimensions 273mm (10.75”) Width 505mm (19.9”) Depth 150mm (5.9”) Height  Cooking elements (Models CR2B23T3B & CR2B23T4W ) Position Diameter Power Upper 175mm (6.9”) 1800W Lower 140mm (5.5”) 1200W Connection voltage...
  • Page 15: Troubleshooting

    TROUBLESHOOTING Problem Description Reason Burner not glowing red after * Plug not inserted into an active socket selecting cooking zone * Break in inner circuit (approximately 3 seconds) Burner glowing red intermittently * The cooktop temperature is controlled by switching the heat on and off.
  • Page 16: Limited Warranty

    OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. Call SUMMIT customer service toll-free in the U.S.A. @ 1-800-932-4267, Monday to Friday 9:00 AM - 5:00 PM (ET). Order parts online at www.summitappliance.com/support...

This manual is also suitable for:

Cr2b23t4wCr2b15t1bCr2b15t2w

Table of Contents