Operating Instructions - Kenmore CSV Go DS4020 Manual

CAUTION
Moving parts! To reduce the risk of personal injury, DO NOT
touch the brush roll w hen vacuum is on. Contacting the brush
roll w hile it is rotating can cut, bruise or cause other injuries.
Always turn off before servicing. Use caution w hen operating
near children or pets.
The on/ off trigger button is located on
the inner side of the hand vacuum handle.
The vacuum has two-speed controls, ECO
and HIG H. Change speed by pressing the
speed change button shown below.
O n/ O ff
Button
CAUTION
Operate the appliance at room
temperature betw een 39.2°F (4 °C) and
104 °F (4 0°C) in order to ensure safe and
normal function.
Before vacuuming floors, connect the
motorized nozzle to the wand. Then
connect the hand vacuum to the wand. The
motorized nozzle can be used for cleaning
OPERATIN G IN STRUCTION S
CON TROL BUTTON S
Speed
Change
Button
VACUUM OPERATION
- 11 -
Battery Pow er Level Indicator
The battery power level indicator lights up
to give you an idea of how much battery
power remains at any given time.
Battery Pow er Level
Indicator
Blue, Continuous
G reen, Continuous
Yellow, Continuous
Red, Continuous
Red, Flashing
N OTE:
Please remove the battery
indicator label before first use.
carpets or rugs, as well as hard floors.
Battery Capacity
75% ~ 100%
50% ~ 74%
25% ~ 49%
(Recharge
recommended)
10% ~ 24%
0~ 9%
(Recharge required)