Department Preset Price Setting Or Changing With Dll (Submode 72) - TEC MA-1595-1 Series Owner's Manual

7. DEPARTMENT AND PLU MAINTENANCE
Deletion
CONDITION
OPERATION
63 [@/FOR]
NOTES: 1. Up to 100 PLUs can be added/changed/deleted once.
2. The DLL is possible while a sales transaction is being performed in the Satellite Terminal.

7.2 Department Preset Price Setting or Changing with DLL (Submode 72)

This submode is used to newly set or change a preset price to required departments, and loads the price data
into Satellite Terminals.
CONDITION
OPERATION
72 [@/FOR]
Repeatable for other departments
NOTES: 1. When the [AT/TL] key is depressed in the above operation, it sends a DLL-start command to the
designated terminals, makes the terminals HOLD condition, and executes DLL. After DLL is
completed, it sends a DLL-end command to each terminal and releases the HOLD condition.
2. When zero is entered as the New Preset Price value, the department is set with a zero price.
When the new Preset Price entry is skipped and the [DEPT] or [#] is simply depressed, it will be
an open-price department.
The sales data of the required PLUs are zero and all terminals are outside a sale,
programming, or report taking operations. (when the feature "PLU not to be inquired"
is selected.)
The sale data of the required PLUs are zero and any time outside a sale for Master.
(when the feature "PLU to be inquired" is selected)
Mode Lock: SET and IN-LINE Lamp illuminated
[ITEM CORR]
Repeatable for other PLUs to be deleted.
Any time outside a sale
Mode Lock: SET and IN-LINE Lamp illuminated
| New Preset Price | [DEPT]
Max. 6 digits; 0 to 999999 (Department Preset Code Key)
(result: $0.00 to $9999.99)
| Dept. Code | [DP#]
Max. 2 digits; 1 to 99
7.2 Department Preset Price Setting or Changing with DLL (Submode 72)
| PLU code | [PLU]
| New Preset Price | [#]
Max. 6 digits; 0 to 999999
* (result: $0.00 to $9999.99)
* For sequentially programming the department,
the Dept Code specification can be skipped.
7- 3
EO1-11152
[ST] [AT/TL]
[AT/TL]