When A Power Failure Occurs - TEC MA-1595-1 Series Owner's Manual

10. REGISTERING PROCEDURE AND PRINT FORMAT

10.67 When a Power Failure Occurs...

If a power failure occurs, all sales data stored in the memory are automatically protected by the battery installed
in the ECR. The battery is rechargeable and it is recharged when the AC power returns. As the power returns,
the ECR revives to continue the work and displays the last item entered before the power failure. However,
please note the following phenomena to occur on the ECR when the power is regained:
1. The printer will work to print the entered data without failure after the power recovery, if any data was being
printed. However, one extra line may be fed on the power recovery depending on the power-recovery timing.
2. The following are the display indications on the power recovery:
ECR CONDITION at the time of Power Failure
OUTSIDE A No key-in has been operated.
SALE Numeric or Declaration keys have
been entered but not motorized keys.
DURING A No Numeric or Declaration keys have
SALE been entered.
Numeric or Declaration keys have
been entered.
In case a power failure occurred during printing, after the power recovery, a line of "*****" is printed on the receipt,
then whole contents will be printed.
Example:
-- Receipt Print Format --
DP01
DP01
********************************
DP01
DP01
DP01
DP01
DP01
CASH
ITEM
JONES
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
08-30-2003 SAT #3001
$1.00
$1.00
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
08-30-2003 SAT #3001
$1.00
$1.00
$1.00
$1.00
$1.00
$5.00
5
0357 18:55TM
DISPLAY INDICATION on the Power Recovery
Displays zero. Operations may go on.
Regains the display content that was obtained just
before the power failure. The operations may be
continued.
Regains the display content that was obtained just
before the power failure. The operations may be
continued.
10-69
EO1-11152
10.67 When a Power Failure Occurs...