Drive Pinion - Meritor MS-113 Maintenance Manual

5. Use a bearing puller or a press to remove the
bearing cones from both halves of the
differential case. Figure 2.19.
Figure 2.19
1 DIFFERENTIAL CASE

Drive Pinion

1. Remove and discard the pinion cage O-ring.
Figure 2.20.
Figure 2.20
1
2
3
1 PINION CAGE
2 O-RING
3 OUTER BEARING CUP
4 OUTER BEARING CONE
2. Remove the outer bearing cup and seal from
the pinion cage. Discard the seal.
3. Use a bearing puller or a press to remove the
inner and outer bearing cones from the drive
pinion.
4. Remove the shim from the drive pinion.
Maintenance Manual MM-0230
Issued 07-02
1
5
4
7
6
5 DRIVE PINION
6 SHIM
7 INNER BEARING CONE
Copyright 2002
ArvinMeritor, Inc.
Removal and Disassembly
Section 2
Page 7