Button
Remap a Button
You can change the default function of the Left Scan, Right Scan, Volume Up and
Volume Down buttons as well as the Back, Home, and Recent virtual buttons.
Note: The Push-to-Talk button cannot be remapped.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the plus sign (+).
4. Press the button you want to remap or select one of the virtual buttons.
5. Tap OK.
6. Select one of the following options:
CT45/CT45 XP Mobile Computer Series User Guide
Description
Power
> Honeywell Settings > Keyremap.
•
Tap Keys to view available functions. Select the function you want assigned
to the button.
•
Tap Apps to view available applications. Select the application you want
assigned to the button.
•
Tap Actions to enter an Intent or Broadcast. Tap OK to assign the action to
the button. For example, to start an Intent, type
com.android.settings/com.android. settings.wifi.WifiSettings.
•
Tap Command to enter a command that will be executed when the button is
pressed. This option supports all ADB shell commands. For example, if you
choose a button to remap and enter the command "input keyevent 64",
pressing the selected button will open the web browser on the device.
•
Tap Text to type characters to display when the remapped key is pressed. Use
a comma "," to separate the characters. Tap OK to assign the text to the
button. Examples are listed below:
Press and release the Power button to activate or exit Screen Timeout
mode (see page 65).
Press and hold the button for approximately 3 seconds, and then release
to view the options menu.
•
Power - select Power off or Restart
•
Swap Battery - CT45 XP models only, see page
•
Emergency
Perform a manual restart if touchscreen is unresponsive (see page 95).
7
25