Audio Settings; Insert A Microsd Card - Honeywell CT45 Series User Manual

Audio Settings

This section describes the audio and sound settings you can configure in the
Settings app.
•
Sound Settings
Setting
Media volume
Call volume
Ring & notification volume
Alarm volume
Vibrate for calls
Do not disturb
Shortcut to prevent ringing
Phone ringtone
Advanced
Default notification sound
Default alarm sound
Other sounds and Vibrations

Insert a microSD Card

You can use a microSD card to increase file storage capacity or to install software.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC memory cards with the computer for maximum
performance and durability.
Note: Format the memory card before initial use.
1. Save your files and close any open applications.
2. Press and hold the Power button until the options menu appears.
3. Tap Power off or Power > Power off depending your computer model.
4. Remove the battery from the computer, refer to
CT45/CT45 XP Mobile Computer Series User Guide
To change audio settings, open the Settings
Description
Use the sliders to set the volume for media (e.g., music, videos, and
games), calls, alarms and rings (notifications and ringtones).
Select to enable vibrate mode when the phone is ringing.
Select to set which notifications to let through when you have Do
Not Disturb turned On and when you want to be left alone.
Set what happens when you simultaneously press the Power and
Volume up button.
Options include: Vibrate, Mute or turn the shortcut Off.
Select a default ringtone.
Select a notification sound.
Select an alarm sound.
Turn sounds On or Off for:
• Dial pad tones
• Screen locking sounds
• Charging sounds and vibration
• Touch sounds
• Touch vibration
app and then tap Sound.
page 7.
17