Honeywell CT45 Series User Manual page 83

Once you connect to a saved Wi-Fi network:
•
•
•
•
Configure Proxy Settings for a Wi-Fi Network
If you need to connect to network resources through a proxy server, you can
configure settings for the proxy server for each Wi-Fi network you add. By default,
the Wi-Fi networks you add are not configured to connect through a proxy server.
Note: Proxy settings apply only to the Wi-Fi network you modify. You must change proxy
settings for each network requiring a proxy server.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap and hold the name of a connected network, and then tap Modify network.
4. Tap Advanced options.
5. Under Proxy, tap None to open menu, and then select Manual.
6. Enter the proxy settings for the network.
7. Tap Save.
Disable Wi-Fi Notifications
By default, when Wi-Fi is enabled, you receive notifications in the Status bar when
the computer discovers a wireless network. You can disable these notifications.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap Wi-Fi preferences. The Configure Wi-Fi menu appears.
4. Tap Notify for public networks to toggle the setting On or Off.
CT45/CT45 XP Mobile Computer Series User Guide
Tap the network name on the list to view details (e.g., status, signal strength,
speed, frequency, security type). Select Cancel to close details screen.
The computer automatically connects to the same network when the network is
in range and the Wi-Fi radio is turned on.
To remove a network from your saved list, tap and hold the network name and
select Forget. You can do this for networks you no longer use.
To view a list of only your saved networks, tap
networks.
> Network & internet > Wi-Fi. The list of available Wi-Fi
networks appears.
> Network & internet > Wi-Fi. Verify the Wi-Fi radio is turned
On.
, and then select Saved
73