About Status Bar Icons; Remap A Button - Honeywell Dolphin CT60 Series User Manual

About Status Bar Icons

Status and notification icons show you the current status of your network, the
battery, notifications, and sounds. Use the table below to understand some of the
most common icons.
Status and Notification Icons
Icon

Remap a Button

You can change the default function of the Left Scan, Right Scan, or Camera
buttons as well as the Back, Recent, Home, and Search virtual buttons.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the plus sign (+).
4. Press the button you want to remap or select one of the virtual buttons.
5. Tap OK.
6. Select one of the following options:
Dolphin CT60 Mobile Computer
Description
Pending alarm and Alarm is set
New text message or multimedia
message
Error with text or multimedia message
delivery
New email
Computer is connected to a PC with a
USB cable
Synchronizing data
Error with sync or sign-in
Computer is connected with Ethernet
> Honeywell Settings > Key Remap.
• Tap Keys to view available functions. Select the function you want assigned
to the button.
• Tap Apps to view available applications. Select the application you want
assigned to the button.
• Tap Actions to enter an Intent or Broadcast. Tap OK to assign the action to
the button. For example, to send a Broadcast,
Icon Description
Vibrate mode is turned on
Airplane mode is turned on.
Bluetooth is turned on.
SD card is full
Wi-Fi network connected with full
signal strength
Wi-Fi network connected but no signal
strength
Phone connected with full amount of
bars.
Phone connected with full amount of
bars but no Internet connection.
27