Error Code System - Stoelting Futura F131 Owner's Manual

CODE
*Refer to Page 19 for Troubleshooting.
**
Flashing CLEAN light is not an error. It indicates the freezer is in the CLEAN mode. To exit, turn the OFF-ON
switch to the OFF position.

ERROR CODE SYSTEM

P.T.F. LIGHT FLASHES
01 Sequence of one
02 Sequence of two
03 Sequence of three
04 Sequence of four
05 Sequence of five
06 Sequence of six
07 Sequence of seven
If the Clean switch is operated three times within 10 seconds, this will
cause the Push-To-Freeze light to flash and the clean function will be
disabled for 10 minutes. The power switch must remain on or the 10
minute timer will not time out. A flashing clean light is not an error.
MEANING
* Program board
* Power board
* Low torque error
** Clean error
* Barrel sensor
* Hopper sensor
* Drive motor
NOTE
23