Configuring The System; Configuration Menu - ADC HiGain H2TU-C-202 User Manual

Provisioning

Configuring the System

The Config menu (Figure
•
Standard options
•
PairGain options
•
Date and time (see
•
Master Clear (see
•
Reset to factory default configuration
Monitor Performance
ID: xxxx--xxxx--xxxx--xxxx
Making Changes to Standard and PairGain Options
Figure 7 and Figure 8 on page 13
those that are supported by HiGain HDSL2 units when connected to units from other vendors. PairGain options
are an extended set of options available only when using HiGain units exclusively. For a description of each option
and a list of possible option settings, refer to
options:
1 Type C to select the Config menu.
2 Use the and
↑ ↓
3 Use the arrow keys to select an option.
4 Press the SPACEBAR
5 Press ENTER to activate your choice.
12
6) allows you to make the following types of system configuration changes:
(Figure 7 on page 13)
(Figure 8 on page 13)
"Setting Date and Time" on page
"Monitoring System Activity and Performance" on page
(Figure 9 on page
Event Log Config
+----------------------+
| Standard Options ->
| PairGain Options ->
| Date and Time
| Master Clear
| Set Factory Defaults |
+----------------------+
02/15/00 12:30:01
Figure 6. Configuration Menu
show the Standard and PairGain configuration options. Standard options are
Table 5 on page 14
arrow keys to select Standard Options or PairGain Options, and press
to cycle through the available settings for that option.
March 14, 2000
10)
24)
23)
Inventory Rlogon Help
|
|
-> |
|
H2TU-C
and Table 6 on page
152-202-116-02, Issue 2
System: OK
15. To make changes to these
ENTER .
H2TU-C-202 List 1F