Hoshizaki IM-240DNE Service Manual page 28

Modular cuber
Hide thumbs Also See for IM-240DNE:
Table of Contents

Advertisement

2) Wash the bin liner, ice deflector and door inner surface with a neutral non-abrasive
cleaner. Rinse thoroughly with a clean cloth and fresh water.
3) Either mix 5 litres of water with 18 ml of 5.25% sodium hypochlorite solution in a
suitable container, or the recommended Hoshizaki sanitiser as directed.
4) Soak a clean sponge or cloth with the solution, and wipe the bin liner, ice deflector
and door inner surface.
5) Rinse thoroughly with fresh water and a clean cloth to wipe off the solution. Close the
bin door.
Note: Some solutions may cause damage to the bin liner surfaces or corrosion on the
metal parts. Always rinse the sanitiser unless directed otherwise by Hoshizaki
guidelines.
[4] Air Filter (Air-Cooled Model Only)
Plastic mesh air filters remove dirt or dust from the air, and keep the condenser from
getting clogged. If the filters get clogged, the icemaker's performance will be reduced.
Remove and clean the air filters at least twice per month:
1) Slide the air filter off the louver.
2) Clean the air filter by using a vacuum cleaner. When severely clogged, use warm
water and a neutral cleaner to wash the air filter.
3) Rinse and dry the air filter thoroughly, and place it in position.
Air Filter
Louver
Fig. 5
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents