Multi-Function Display - Yamaha XMAX 2022 Owner's Manual

Multi-function display

1
6
5
1. Fuel meter
2. Information display
3. Coolant temperature meter
4. Clock
5. Tripmeter display
6. Icy road warning indicator "
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
The "TRIP/INFO" switch is located on
the right side of the handlebar. This
switch allows you to control or change
the settings of the multi-function meter
EAU82302
unit. To use the "TRIP" switch, move
the "TRIP/INFO" switch in direction (a).
2
To use the "INFO" switch, move the
3
"TRIP/INFO" switch in direction (b).
4
1
1. "TRIP/INFO" switch
"
TIP
EWA12423
To switch the displays between kilo-
meters and miles, turn the main switch
to "ON" while holding the "INFO"
switch, and then continue to hold the
"INFO" switch for eight seconds.
Instrument and control functions
Clock
(a) (b)
1. Clock
The clock uses a 24-hour time system.
To set the clock
1. Turn the main switch to "OFF".
2. Push and hold the "TRIP" switch.
3. Turn the main switch to "ON"
4. Use the "TRIP" switch to set the
5. Hold the "TRIP" switch for three
6. Use the "TRIP" switch to set the
5-3
while holding the "TRIP" switch,
and then continue to hold the
"TRIP" switch for eight seconds.
The hour digits will start flashing.
hours.
seconds, and then release it. The
minute digits will start flashing.
minutes.
1
5