Instrument and control functions
Multi-function display
1
6
5
5
1. Fuel meter
2. Information display
3. Coolant temperature meter
4. Clock
5. Tripmeter display
6. Icy road warning indicator "
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
The "TRIP/INFO" switch is located on
the right side of the handlebar. This
switch allows you to control or change
the settings of the multi-function meter
EAU79171
unit. To use the "TRIP" switch, move
the "TRIP/INFO" switch in direction (a).
2
To use the "INFO" switch, move the
3
"TRIP/INFO" switch in direction (b).
4
1
1. "TRIP/INFO" switch
"
The multi-function display is equipped
with the following:
EWA12423
clock
fuel meter
coolant temperature meter
tripmeter display
information display
Clock
(a)
(b)
1. Clock
The clock uses a 24-hour time system.
To set the clock
1. Turn the main switch to "OFF".
2. Push and hold the "TRIP" switch.
3. Turn the main switch to "ON"
4. Use the "TRIP" switch to set the
5. Push the "TRIP" switch for three
6. Use the "TRIP" switch to set the
5-3
while pushing the "TRIP" switch,
and then continue to push the
"TRIP" switch for eight seconds.
The hour digits will start flashing.
hours.
seconds, and then release it. The
minute digits will start flashing.
minutes.
1