Troubleshooting - Yamaha XMAX 2022 Owner's Manual

1. License plate light bulb
3. Insert a new bulb into the socket.
4. Install the socket (together with
the bulb) by pushing it in, and then
install the license plate light unit by
installing the plate and bolts.
Periodic maintenance and adjustment

Troubleshooting

Although Yamaha vehicles receive a
thorough inspection before shipment
1
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your vehicle re-
quire any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the vehicle prop-
erly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
WARNING
When checking the fuel system, do
not smoke, and make sure there are
no open flames or sparks in the ar-
ea, including pilot lights from water
heaters or furnaces. Gasoline or
EAU60701
gasoline vapors can ignite or ex-
plode, causing severe injury or prop-
erty damage.
Smart key system troubleshooting
Please check the following items when
the smart key system does not work.
 Is the smart key turned on? (See
 Is the smart key battery dis-
 Is the smart key battery installed
 Is the smart key being used in a lo-
 Are you using the smart key that is
 Is the vehicle battery discharged?
EWA15142
8-33
page 4-5.)
charged? (See page 4-6.)
correctly? (See page 4-6.)
cation with strong radio waves or
other electromagnetic noise? (See
page 4-1.)
registered to the vehicle?
When the vehicle battery is dis-
charged, the smart key system will
not operate. Please have the vehi-
cle battery charged or replaced.
(See page 8-28.)
EAU76551
8