Adjusting The Shock Absorber Assemblies; Power Outlet - Yamaha XMAX 2022 Owner's Manual

Adjusting the shock absorber
assemblies
WARNING
Always adjust both shock absorber
assemblies equally, otherwise poor
handling and loss of stability may re-
sult.
Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
Turn the adjusting ring in direction (a)
to increase the spring preload.
Turn the adjusting ring in direction (b)
to decrease the spring preload.
 Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.
 Use the spring preload adjusting
tool included in the kit to make this
adjustment.
EAU14895
1 (a)
EWA10211
1
2
3
4
5
3
1. Spring preload adjusting ring
2. Special wrench
3. Position indicator
ECA10102
Spring preload setting:
Minimum (soft):
1
Standard:
3
Maximum (hard):
5
Instrument and control functions

Power outlet

This model is equipped with a 12V DC
(b)
power outlet.
2
1. Power outlet
NOTICE
Do not use the power outlet when
the engine is off, and do not exceed
the specified electrical load; other-
wise the fuse may blow or the bat-
tery may discharge.
When washing the vehicle, do not di-
rect high-pressure washers at the
power outlet area.
5-23
1
Maximum electrical load:
12 W (1 A)
EAUN3360
5
ECAN0140