Setup Capxs; Mounting Capxs - Chamberlain CAPXS Installation Manual

INTRODUCTION
4

Setup CAPXS

INTRODUCTION
On the display, select each tab in Admin Mode to validate setup (network,
inputs, outputs, etc.). Once you have validated the setup, exit Admin Mode.
5

Mounting CAPXS

Insert the CAPXS in the mounting bracket until the unit snaps into
place. Using screws provided, tighten the screws through the side of the
mounting bracket to securely affix the CAPXS to the Mounting Bracket.
ACCOUNT SETUP
ACCOUNT SETUP
POWER NETWORK/MOUNTING
POWER NETWORK/MOUNTING
14
ACCESS CONTROL
ACCESS CONTROL