Connections Overview - Chamberlain CAPXS Installation Manual

INTRODUCTION

Connections Overview

INTRODUCTION
The CAPXS has a combination of access control inputs/outputs that work in conjunction to control one access point.
INTRODUCTION
INTRODUCTION
REQUEST TO EXIT (REX) & SUPERVISED INPUT (SUP) - TERMINAL 6,7,8
INTRODUCTION
INPUT/OUTPUT
Postal Lock Input
Wiegand Input
Request to Exit & Supervised
Input
Primary Relay Output
Auxiliary Relay Output
NOTE: Only the 26-bit Wiegand protocol is compatible in UL installations.
ACCOUNT SETUP
ACCOUNT SETUP
ACCOUNT SETUP
ACCOUNT SETUP
POSTAL LOCK - TERMINAL 1,2
WIEGAND INPUT - TERMINAL 3,4,5
PRIMARY RELAY - TERMINAL 9,10,11
AUXILIARY RELAY TERMINAL 12,13,14
ACCOUNT SETUP
USED FOR
External post lock input.
Standard 26-bit, 30-bit Wiegand, HID 37-bit with Facility Code, Transcore 37-bit, 32-bit MiFare.
REX: Used to request activation/release of door for exit purposes. SUP: Used to monitor door/gate
closed state.
Primary relay for door/gate release.
Auxiliary relay for door/gate release.
POWER NETWORK/MOUNTING
POWER NETWORK/MOUNTING
POWER NETWORK/MOUNTING
POWER NETWORK/MOUNTING
POWER NETWORK/MOUNTING
5
ACCESS CONTROL
ACCESS CONTROL
16 VDC
GROUND
(+) Red
ACCESS CONTROL
ACCESS CONTROL
ACCESS CONTROL
ETHERNET
See pages 15-16 for wiring diagrams.
(–) Black