Reset Button - Chamberlain CAPXS Installation Manual

INTRODUCTION ACCOUNT SETUP POWER NETWORK/MOUNTING ACCESS CONTROL

RESET BUTTON

NOTE: It is recommended to reset the CAPXS to factory defaults by using the Factory Reset option in the Admin Mode. In the event you
have forgotten the Admin Code, or the display has become unresponsive, you can manually reset the CAPXS using the Reset Button.
To manually reset the CAPXS: With the CAPXS powered on, press and hold the Reset Button for 3 seconds. The CAPXS will reboot and
restore factory default settings.
NOTE: Resetting to factory default setting will erase Network settings. Have the Network configuration information available to be re-
entered once the reset completes.
17