3-2 Installing the low-profile bracket
a
b
2
c
If the PCIe slot of the desktop PC is the low profile specifications, it is
required to replace the existing bracket with the low-profile bracket.
· To avoid damage caused by static electricity, touch an
NOTE
· When replacing the bracket, do not touch the parts on the
1
Prepare the Phillips screwdriver and remove the screw a (2 positions)
from the PCIe interface board.
2
Replace the existing bracket b attached to the PCIe interface board
a
with the low-profile bracket c , and screw in the screw a (2 positions).
unpainted metallic surface of the PC with your hand to
discharge the static electricity before replacing the bracket.
board surface or push it with excessive force to prevent
the damage.
DP74
23