3-2-A Installing The Pcie Interface Board To Desktop Pc (Dp73 / Dp73Wdr); Installing The Low-Profile Bracket - Olympus DP73 Instructions Manual

3-2-a Installing the PCIe Interface Board to Desktop PC (DP73 / DP73WDR)

Please read this section when connecting DP73 to desktop PC. When connecting to laptop PC, refer to "3-2-b Installing
the PCIe Interface Board to Laptop PC (DP-PXU)"(P. 27).
1
a
2
c
1

Installing the Low-Profile Bracket

If the desktop PC's extension slot is the low-profile specifications, it is
required to replace the existing bracket with the low-profile bracket.
1 Prepare flat-blade and Phillips screwdrivers and remove the " – " screws
a and the " + " screw b .
b
2 Replace the existing bracket with the low-profile bracket
1
tach screws a
CAUTION
Do not provide excessive force when tightening the screws of
PCIe interface boad, since they may be damaged if tightened
excessively.
b .
DP73
c and at-
23