Carrier RG10L/BGEF Owner's Manual page 13

Silence function
2s
FP function
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C/60 F or 20 C/68 F(for models O O O
2
Note: This function is for heat pump air conditioner only.
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C/60 F or 20 C/68 F(for model RG10L10(G2HS)/BGEF& RG10L10(D2HS)/BGEF) to
activate FP function.Press On/Off, Sleep, Mode, Fan and Temp. button while operating will
cancel this function.
LOCK function
5s
+
Turbo
Turbo Function
Press Turbo button
Turbo
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function(some units).
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity. Press ON/OFF, Mode, Sleep, Turbo or Clean button while
operating will cancel silence function.
O RG10L10(G2HS)/BGEF
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
5s
Press together Turbo button and Humidity button at the
Humidity
same time more than 5 seconds to activate Lock function.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
When you select Boost feature in COOL mode,
the unit will blow cool air with strongest wind setting to
jump-start the cooling process.
When you select Boost feature in HEAT mode,
for units with Electric heat elements, the Electric HEATER
will activate and jump-start the heating process.
& RG10L10(D2HS)/BGEF only).
12