Carrier RG10L/BGEF Owner's Manual page 10

Setting the TIMER
TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
TIMER ON setting
Press TIMER button to initiate
the ON time sequence.
TIMER OFF setting
Press TIMER button to initiate
the OFF time sequence.
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes increments with each
press, up to 10 hours. After 10 hours and up to 24, it will increase in 1 hour increments. (For example,
press 5 times to get 2.5h, and press 10 times to get 5h,) The timer will revert to 0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
TIMER ON & OFF setting(example)
Keep in mind that the time periods you set for both functions refer to hours after the current time.
xn
Timer starts
Current
2:00PM
time 1PM
Press Temp. up or down button for
for multiple times to set the desired
time to turn on the unit.
x5
Press Temp. up or down button for
for multiple times to set the desired
time to turn off the unit.
x10
Unit turns
ON
3:30PM
3:00PM
2.5 hours later
5 hours later
Unit turns
OFF
4PM 5PM
6PM
09
Point remote to unit and wait 1sec,
the TIMER ON will be activated.
1
sec
Point remote to unit and wait 1sec,
the TIMER OFF will be activated.
1
sec
xn xn
Example: If current timer is 1:00PM,
to set the timer as above steps, the
unit will turn on 2.5h later (3:30PM)
and turn off at 6:00PM.